Journals
1)
Orlando Rios, Damian Cupid, Hans J Seifert, and Fereshteh
Ebrahimi, “Characterization of the invariant reaction involving
L, η, γ and σ
phases
in the Ti-Al-Nb System”, Acta Materialia, accepted.
2)
Hung-Yu Tien, Mahesh Tanniru, Chang-Yu Wu and Fereshteh Ebrahimi,“
Mechanism of hydrogen capacity dependence on the hydrogenation
temperature”, Scripta Materialia, accepted.
3)
M. Tanniru, D. K. Slattery and F. Ebrahimi, “A study of
stability of MgH2 in Mg-8at%Al alloy powder”,
International Journal of Hydrogen Energy, submitted.
4)
M. Tanniru and F. Ebrahimi, “Effect of Al on the
hydrogenation characteristics of nanocrystalline Mg powder”,
International Journal of Hydrogen Energy, 2009, in press.
5)
H-Y. Tien, M. Tanniru, C-Y. Wu and F. Ebrahimi, “Effect of
hydride nucleation rate on the hydrogen capacity of Mg”,
International Journal of Hydrogen Energy, 2009, Vol. 36, 6343-6349.
6)
N. K. Arakere, S. Siddiqui and F. Ebrahimi, “Evolution of
Plasticity in notched Ni-base superalloy single crystals”,
International Journal of Solids and Structures, 2009, Vol.46,
3027-3044.
7)
Damian M. Cupid, Olga Fabrichnaya, Orlando Rios, Fereshteh
Ebrahimi and Hans Seifert, “Thermodynamic Reassessment of the Ti-Al-Nb
System”, International Journal of Materials Research Issue, 2009,
Volume 2, 218-233
8)
Orlando Rios, Sonalika Goyel, Michael S. Kesler, Damian M.
Cupid, Hans J. Seifert and Fereshteh Ebrahimi, "An Evaluation of
High Temperature Phase Stability in Ti-Al-Nb System", Scripta
Materialia, in press.
9)
Hongqi Li, Hahn Choo, Yang Ren, Tarik A. Saleh, Ulrich
Lienert, Peter K. Liaw, and Fereshteh Ebrahimi, "Strain-Dependent
Deformation Behavior in Nanocrystalline Metals" Physical Review
Letters, 2008, Volume 101,015502 (1-4) Selected for July 18,
2008, of Virtual J. of Nanoscale Science and Technology.
10)
F. Ebrahimi and E. F. Westbrooke, "Effect of HIP'ping on
deformation anisotropy in a single-crystal Ni-based superalloy",
Acta Materialia, 2008, Volume 56, 4349-4357.
11)
S. S. V. Tatiparti and F. Ebrahimi, "Electrodeposition of
Al-Mg Alloy Powders", J. Electrochemical Society, 2008, Volume 155,
D363-D368.
12)
Y. Wang, K. L. Duncan, E. D. Wachsman, F. Ebrahimi, "Effects
of Reduction Treatment on Fracture Properties of Cerium Oxide",
Journal of Ceramic Society, 2007, Volume 90, 3908-3914.
13)
Keith L. Duncan, Yanli Wang, Sean R. Bishop, Fereshteh
Ebrahimi, and Eric D. Wachsman, "The Role of Point Defects in the
Physical Properties of Nonstoichiometric Ceria" Journal of Applied
Physics, 2007, Volume 101, 044906.
14)
F. Ebrahimi and H. Li, "The Effect of Annealing on
Deformation and Fracture of a Nanocrystalline fcc Metals", Journal
of Materials Science, 2007, Vol.42, 1444-1454. Invited.
15)
Y. Wang, K. L. Duncan, E. D. Wachsman, F. Ebrahimi, "The
Effect of Oxygen Vacancy Concentration on the Elastic Modulus of
Flourite-Structured Oxides", J. Solid State Ionics, 2007, Vol. 178,
53-58.
16)
F. Ebrahimi, A. J. Liscano, D. Kong, Q. Zhai and H. Li,
“Fracture of Bulk Face Centered Cubic (FCC) Metallic
Nanostructures”, Rev. Adv. Mater. Sci., 2006, Vol.13, 33-40.
17)
K. L. Duncan, Y. Wang, S. R. Bishop, F. Ebrahimi and E.D.
Wachsman, "The Role of Point Defects in the Physical Properties of
Flourite Oxides", J. American Ceramic Society, 2006, Vol. 89,
3162-3166.
18)
F. Ebrahimi, Z. Ahmed and H. Q. Li, "Tensile Properties of
Nanocrystalline FCC Metals", Materials and Manufacturing Processes",
2006, Vol.21, 687-693.
19)
H. Li, F. Ebrahimi, H. Choo and P. Liaw, "Grain Size
Dependence of Mechanical Properties in Ni-Fe Alloys", Journal of
Materials Science, in press.
20)
F. Ebrahimi and H. Li, "Grain Growth in Electrodeposited
Nanocrystalline FCC Ni-Fe Alloys", Scripta Materialia, 2006, Vol.
55, 263-266.
21)
F. Ebrahimi, L. E. Forero, S. Siddiqui and N. Arakere,
"Effect of Notch Orientation on the Evolution of Plasticity in
Superalloy Single Crystals", J. Materials Science and Engineering A,
2006, Vol. 426, 214-220.
22)
H. Li and F. Ebrahimi, "Tensile Behavior of a Nanocrystalline
Ni-Fe Alloy", Acta Materialia, 2006, Vo. 54, 2877-2886.
23)
H. Li and F. Ebrahimi, "Ductile-to-Brittle Transition in
Nanocrystalline Metals", Advanced Materials, 2005, Vol. 17, pp.
1969-1972. (featured on the front page of the journal; selected
as on-line publication in Science; Science Editor’s Choice, Science,
Vol. 309, Issue 26, 2005)
24)
N. K. Arakere, S. Magnan, S. Siddiqui, L.E. Forero and F.
Ebrahimi, "Investigation of Three-Dimensional Stress Fields and Slip
Systems for FCC Single Crystals Superalloy Notched Specimens", ASME
J. of Eng. For Gas Turbines and Power, 2005, VOL.127, pp.629-637.
25)
Eboni F. Westbrooke, Luis E. Forero and Fereshteh Ebrahimi,
"Slip Analysis in a Ni-base Superalloy", Acta Materialia, 2005, Vol.
53(7), pp. 2137-2147.
26)
F. Ebrahimi, Z. Ahmed and H. Q. Li, "The Effect of Stacking
Fault Energy on Plastic Deformation of Nanocrystalline Face-Centered
Cubic Metals", J. Appl. Phys. Lett., 2004, Vol. 85(17), pp.
3749-3751.
27)
H. Q. Li and F. Ebrahimi, "Transition of Deformation and
Fracture Behaviors in Nanostructured FCC Metals", J. App. Phys. Lett.,
2004, Vol. 84, pp. 4037-4039.
28)
F. Ebrahimi and H. Q. Li, "Structure and Properties of
Electrodeposited Nanocrystalline FCC Ni-Fe Alloys," Rev. Adv. Mater.
Sci, 2003, Vol. 4, 1118-1122.
29)
H. Q. Li and F. Ebrahimi, "An Investigation of Thermal
Stability and Microhardness of Electrodeposited Nanocrystalline
Ni-21%Fe Alloys," Acta Materialia, 2003, Vol. 51, pp. 3905-3913.
30)
F. Ebrahimi and Z. Ahmed, "The Effect of Current Density on
Properties of Electrodeposited Nanocrystalline Nickel,"J. Applied
Electrochemistry, 2003, Vol. 33, pp. 733-739..
31)
F. Ebrahimi and Z. Ahmed, "The Effect of Substrate on the
Microstructure and Tensile Properties of Electrodeposited
Nanocrystalline Ni," Materials Characterization, 2003, Vol. 49(5),
pp. 373-379.
32)
F. Ebrahimi, A. J. Liscano, D. Kong and V. Krishnamoorthy, "
Evolution of Texture in Electrodeposited Ni/Cu Layered
Nanostructures," Phil. Mag, 2003, Vol. 83, pp. 457-476.
33)
H. Li and F. Ebrahimi, "Synthesis and Characterization of
Electrodeposited Nanocrystalline Nickel-Iron Alloys," Materials
Science and Engineering, 2003, Vol. A347, pp. 93-101.
34)
F. Ebrahimi and A. J. Liscano, "Failure of Ni/Cu Laminated
Nanostructures," Materials Transaction, JIM, 2001, Vol. 42(1),
pp.120-1277. (Invited Paper)
35)
F. Ebrahimi and A. J. Licano, "Microstructural/Mechanical
Properties Relationship in Electrodeposited Ni/Cu Nanolaminates,"
Materials Science and Engineering Journal, 2001, Vol. 301, pp.23-34.
36)
F. Ebrahimi, J. Yanevich, and D. P. Deluca, "Deformation and
Fracture of the PWA1472 Superalloy Single Crystal," Acta Materialia,
2000, Vol. 48, pp. 469-479.
37)
F. Ebrahimi, G. R. Bourne, M. S. Kelly, and T. E. Matthews,
"Mechanical Properties of Nanocrystalline Nickel Produced by
Electrodeposition," Nanostructured Materials Journal, 1999, Vol.
11(3), pp. 343-350.
38)
F. Ebrahimi and L. Kalwani, "Fracture Anisotropy in Silicon
Single Crystal," Materials Science and Engineering, 1999, Vol. A268,
pp. 116-126.
39)
F. Ebrahimi and D. Kong, "Effect of Microstructure on
Strength and Fracture of Electrodeposited Cu/Ni Layered Nano-Composite,"
Scripta Materialia, 1999, Vol. 40, pp. 609-616.
40)
F. Ebrahimi, Q. Zhai, and D. Kong, "Mechanical Properties of
Cu/Ag Multilayered Composites," Materials Science and Engineering,
1998, Vol. 255, pp.20-32.
41)
F. Ebrahimi and Q. Zhai, "Effect of Silver on Strength of
Electrodeposited Copper," Scripta Materialia, 1998, Vol.39, pp.
1401-1406.
42)
K. E. Harris, F. Ebrahimi, and H. Garmestani "Texture
Evolution in NiAl", Journal of Materials Science and Engineering,
1998, Vol.247, pp. 187-194.
43)
F. Ebrahimi, Q. Zhai, and D. Kong, "Deformation and Fracture
of Electrodeposited Copper," Scripta Materialia, 1998, Vol. 39, pp.
315-321.
44)
F. Ebrahimi and S. Shrivastava, "Brittle-to-Ductile
Transition in NiAl Single Crystal," Acta Materialia, 1998, Vol. 46,
pp.1493-1502.
45)
F. Ebrahimi and S. Shrivastava, "Crack Initiation in
Brittle-to-Ductile Transition Regime of NiAl Single Crystals,"
Materials Science and Engineering, 1997, Vol. 239-240, pp.386-392.
46)
F. Ebrahimi and G.T.Hoyle, "Brittle to Ductile Transition in
Polycrystalline NiAl", Acta Materialia, 1997, Vol. 45, pp.
4193-4204.
47)
F. Ebrahimi and J. G. L. Ruiz Aparicio, "Diffusivity in the
Nb Ti Al Ternary Solid Solution", The Journal of Alloys and
Compounds, 1996, Vol. 245, pp. 1-9.
48)
B. J. G. de Aragao and F. Ebrahimi, "High Temperature
Deformation of Nb Ti Al Alloys with + Microstructure", Journal of
Materials Science and Engineering, 1996, Vol. 208, pp. 37 46.
49)
F. Ebrahimi, A. Gomez, and T. G. Hicks, "Nature of Slip
During Indentation on {100} Surface of NiAl", Scripta Metall. et
Mater., 1996, Vol.35, pp. 337 342.
50)
H. K. Seo and F. Ebrahimi, "Ductile Crack Initiation in
Ferritic Steels," Acta Materialia, 1996, Vol. 44, pp. 831 843.
51)
F. Ebrahimi and S. I. Hussain, "Crack Path in Single
Crystals," Scripta Metall. Mater., 1995, Vol. 23, pp. 1507 1511.
52)
F. Ebrahimi, B.J.G. De Aragao, and J.R. Castillo Gomez,
"Evaluation of Fracture Toughness of Duplex Microstructures by
Indentation Technique," Journal of Materials Science and
Engineering, 1994, Vol. 177, L7 L10.
53)
J.G.L. Ruiz Aparicio and F. Ebrahimi, "Diffusivity in the Nb
Al Binary Solid Solution," Journal of Alloys and Compounds, 1993,
Vol. 202, pp. 117 123.
54)
F. Ebrahimi, D.T. Hoelzer, and J.R. Castillo Gomez, "Fracture
Toughness of +x Microstructures in the Nb Ti Al System," Journal of
Materials Science and Engineering, 1993, Vol. A171, pp. 35 45.
55)
F. Ebrahimi and J.R. Castillo Gomez, "The Effect of Plastic
Deformation on Fracture Morphology of the Sigma Phase in the Nb Ti
Al System," Acta Metallurgica et Materialia, 1992, Vol. 40, pp. 1409
1416.
56)
F. Ebrahimi, "The Effect of Applied Displacement Rate on the
Observation of Crack Instability," International Journal of
Fracture, 1992, Vol. 56, pp. 61 73.
57)
F. Ebrahimi, "Probability of Intergranular Fracture in
Intrinsically Brittle Materials," Scripta Metallurgica et
Materialia, 1991, Vol. 25, pp. 1737 1740.
58)
F. Ebrahimi and F. Wang, "Fracture Behavior of Urinary
Stones," Journal of Biomedical Materials Research, 1989, Vol. 23,
pp. 507 521.
59)
F. Ebrahimi, B. Hoover, and D.T. Hoelzer, "On the Effect of
Cu on Carbide Nucleation," Scripta Met., 1988, Vol. 22, pp. 219 222.
60)
F. Ebrahimi and J. Ali, "Evaluation of Published Data on
Ductile Initiation Fracture Toughness of Low Alloy Structural
Steels," Jnl. of Testing and Evaluation, 1988, Vol. 16, pp. 113 123.
61)
M.K. Miller, D.T. Hoelzer, F. Ebrahimi, J.R. Hawthorne, and
M.G. Burke, "Characterization of Irradiated Model Pressure Vessel
Steels," Jnl. de Physique, Colloque C6, 1987, pp. 423 428.
62)
D.T. Hoelzer, J.A. Ali, and F. Ebrahimi, "A Study of the
Correlation Between Crack Tip Opening Displacement (CTOD) and
Stretch Zone Width (SZW)," Scripta Met., 1986, Vol. 20, pp. 1575 80.
63)
F. Zia Ebrahimi and G. Krauss, "Mechanisms of Tempered
Martensite Embrittlement in Medium Carbon Steels," Acta Met., 1984,
Vol. 32, pp. 1767 77.
64)
F. Zia Ebrahimi and G. Krauss, "The Evaluation of Tempered
Martensite Embrittlement in 4130 Steel by Instrumented Charpy V
Notch Testing," Met. Trans. A, 1983, Vol. 14, pp. 1109 19.
65)
F. Zia Ebrahimi, D.K. Matlock, and G. Krauss, "On Ductile
Crack Initiation in Notched Bend Specimens," Scripta Met., 1982,
Vol. 16, pp. 987 92.
Proceedings
66)
Damian M. Cupid, Olga Fabrichnaya, Fereshteh Ebrahim and,
Hans J. Seifert,”Phase Equilibria and Thermodynamic Re-assessment of
the Ti-Al-Nb System”, in Materials Characterization, Computation and
Modeling, TMS Proceedings, Vol.2 (2008) 245-251.
67)
S. Siddiqui, N. K. Arakere and F. Ebrahimi, “Effect of
Temperature and Crystal Orientation on the Plasticity (Slip)
Evolution in Single Crystal Nickel Base Superalloy Notched
Specimens”, Proceedings of 2007 ASME Expo, GT2007-27095.
68)
S. Siddiqui, N. K. Arakere and F. Ebrahimi, "Evolution of
Slip Through the Thickness of a Single Crystal Nickel Base
Superalloy Notched Specimen", Proceedings of 2006 ASME Expo,
GT2006-90454, May 8-11, Barcelona, Spain.
69)
Y. Wang, K. Duncan, E. D. Wachsman and F. Ebrahimi, "Effects
of Oxygen Vacancy Concentration on Mechanical Properties of Cerium
Oxide", proceedings of 208th ECS Meeting, October 16-October 21, ECS
Transactions, Vol. 1.
70)
N. K. Arakere, S. Magnan, S. Siddiqui, L.E. Forero and F.
Ebrahimi, "Investigation of Three-Dimensional Stress Fields and Slip
Systems for FCC Single Crystals Superalloy Notched Specimens",
Proceedings of 2004 ASME Turbo Expo, GT2004-53938, July 14-17,
Vienna, Austria. (Best paper award)
71)
F. Ebrahimi, Z. Ahmed and H. Q. Li, "Tensile Properties of
Nanocrystalline FCC Metals", in Nanomaterials: Synthesis,
Characterization and Application, Proceedings of Nano2004
International Conference, Tata McGraw-Hill Pub. Co., 2004, pp.
83-93.
72)
F. Ebrahimi, Z. Ahmed, K. L. Morgan and A. J. Liscano,
"Fracture of Nanostructured FCC Metals," 2001, 10th International
Congress on Fracture Proceedings.
73)
F. Ebrahimi, Z. Ahmed, and K. L. Morgan, "Effect of Grain
Size Distribution on Tensile Properties of Electrodeposited
Nanocrystalline Nickel," MRS Proceedings, 2001, Vol. 634, pp.
B.2.7.1-B.2.7.6.
74)
K. L. Morgan, Z. Ahmed, and F. Ebrahimi, "The Effect of
Deposition Parameters on Tensile Properties of Pulse-plated
Nanocrystalline Nickel," MRS Proceedings, 2001 Vol. 634,
pp.B.3.11.1-B.3.11.6.
75)
F. Ebrahimi, Q. Zhai, D. Kong, and G. R. Bourne, "A
Comparison of Fracture Behavior of Nanolaminates with Nanocrystals,"
in Advanced Materials for 21st Century: The 1999 Julia Weertman
Symposium, Edited by Y-W. Chung et al., TMS Publication, Warrendale
Pacific, 1999, pp. 421-430.
76)
F. Ebrahimi, D. Kong, T. E. Matthews, and Q. Zhai,
"Processing of Metallic Nanostructures by Electrodeposition
Techniques," in Processing and Fabrication of Advanced Materials
VII, Edited by Srivastan and Khor, TMS Publication, Warrendale, PA,
1998, pp.509-521.
77)
Q. Zhai, D. Kong, A. Morrone, and F. Ebrahimi,
"Characterization of High Strength Cu Ag Multilayered Composites",
MRS Proceedings, 1997, Vol. 451, pp. 489-494.
78)
D. T. Hoelzer and F. Ebrahimi, "The effect of Aluminum on the
Formation of Orthorhombic Plates in the Nb-Ti-Al Ternary System",
MRS Proceedings, 1997, Vol. 460, pp. 97-102.
79)
F. Ebrahimi and M. L. C. Henne, "Characterization of
Consolidated Rapidly Solidified Cu Nb Ribbons", MRS Proceedings,
1997, Vol. 457, pp. 279-284.
80)
D. Kong, Q. Zhai, and F. Ebrahimi, "Annealing Effects on the
Microstructure of Electrodeposited Cu/Ag Multilayered Nanocomposites,"
MRS Proceedings, 1998, Vol. 505, pp. 457-462.
81)
S. Shrivastava and F. Ebrahimi, "Effect of Prestraining on
the Brittle to Ductile Transition of NiAl Single Crystals", MRS
Proceedings, 1997, Vol. 460, pp. 393-398.
82)
M. L. C. Henne and F. Ebrahimi, "Characterization of Melt
Spun Cu Nb Ribbons", MRS Symposium Proceedings, 1995, Vol. 362, pp.
211 216.
83)
S. Shrivastava and F. Ebrahimi, "Effect of Crystallographic
Orientation on the Fracture Toughness of NiAl Single Crystals", MRS
Symposium Proceedings, 1995, Vol. 364, Part I, pp. 431 436.
84)
D. T. Hoelzer and F. Ebrahimi, "The Effect of Copper and
Nickel on the Neutron Irradiation Damage in Iron Alloys," MRS
Symposium Proceedings, 1995, Vol. 373, pp. 57 62.
85)
B. J. G. deAragao and F. Ebrahimi, "High Temperature
Deformation of a Nb Ti Al Alloy with + Microstructure," MRS
Symposium Proceedings, 1995, Vol. 364, Part II, pp. 1247 1252.
86)
D.T. Hoelzer and F. Ebrahimi, "Phase Stability of Sigma +
Beta Microstructure in The Ternary Nb Ti Al System," MRS
Proceedings, 1990, Vol. 194, pp. 393 398.
87)
D.T. Hoelzer and F. Ebrahimi, "An Investigation of Phase
Stability in the Ternary Nb Ti Al System," Proceedings of the
Symposium on High Temperature Nb Alloys, TMS Publication,
Warrendale, PA, 1991, pp. 105 119.
88)
V. Krishnamoorthy and F. Ebrahimi, "Effect of Alloying
Elements and Annealing on Irradiation Induced Defects in Iron
Alloys," MRS Proceedings, 1989, Vol. 138, pp. 99 104, 1989.
89)
S. Berge, F. Ebrahimi, and D.T. Read, "Wide Plates in Bending
Application of CTOD Design Approach," Proceedings of the 18th
National Symposium on Fracture Mechanics, ASTM STP 945, 1988, pp.
516 543.
90)
F. Ebrahimi, "A Study of Crack Initiation in the Ductile to
Brittle Transition Region of a Weld," Proceedings of the 18th
National Symposium on Fracture Mechanics, ASTM STP 945, 1988, pp.
555 580.
91)
M.K. Miller, D.T. Hoelzer, F. Ebrahimi, J.R. Hawthorne, and
M.G. Burke, Proceedings of 3rd International Symposium on
Environmental Degradation of Materials in Nuclear Power Systems
Water Reactors, TMS Publication,Warrendale, PA, 1988, pp. 133 139.
